Friday, May 16, 2014

When Is It Time to Have Your Brakes Serviced?

The brakes are one of the most crucial components on your car. Fortunately, it's not difficult to tell when your vehicle is in need of a professional brake inspection. There are several things that will let you know it's time to get your brakes serviced. If you notice any of these symptoms, it's best to get the vehicle looked at immediately by a professional.
Squealing of the Brakes:
One of the first symptoms you'll notice is a squeaking of the brakes when applied. Most disc brakes include a piece called a wear indicator. It is a small piece of metal attached to the brake pad and will begin to contact the brake rotor when the brake pad is worn to a certain level. This contact of the wear indicator with the rotor is what normally happens when brakes are squealing.
Some of the other symptoms you might notice are:
1. Spongy or soft brake pedal
2. Extra hard pedal
3. Strong vibration while applying the brakes
4. Constant grinding of the brakes even while not applying
5. A brake warning light that stays on
6. Pulling or grabbing to one side
7. Pulsation of the brake pedal
8. Clicking noises during braking
Any of these signs is a good indication that it's time for an inspection by a professional. Often times, brake inspections are free and can be performed while you wait. When you bring your vehicle in for an inspection, you'll want to tell the service advisory all of the symptoms you are experiencing. This extra bit of information will be helpful in determining an estimate for repairs and also to insure that all of your issues are addressed. The technician will road test the vehicle to make sure the diagnosis is accurate.
There are two kinds of brakes:
1) Disc and
2) Drum.
Disc brake will have a rotor attached to the axle. Drum brakes are common on back wheels and will have shoes instead of pads.
How a technician can help you:
Once the vehicle is in the auto repair shop, a technician will disassemble the brakes in order to inspect the rotors, drums and other brake components. If the brake pads are severely worn, oftentimes the brake rotors will be damaged and will have to be replaced. If the rotors are still in decent shape, they will be machined to give the rotor a new, smooth surface. Machining the rotors is usually a less expensive option than replacing them. The technician will also look at the brake lines for cracks and holes. A fault or leak in a brake line could cause a loss of brake pressure which could cause brake failure. Your service writer will recommend the best brake pads for your vehicle.
Normally brake pads should last thousands of miles without any problems. This does depend on your vehicle and your driving habits. If you think there is any problem at all with your brakes, the best advice is to get it looked at by a professional as soon as possible


Article Source: http://EzineArticles.com/6134203

No comments:

Post a Comment